MINSK MOTOR PLANT Minsk Service Manual download pdf (Page 64)

245S3A М – 0000100 РЭ

Drain sediment in every 250 hours of engine operation.

Unscrew plug 4 in the lower part of fine fuel filter by 2…3 revolutions in accordance

with figure 16 and drain sediment until clean fuel remains. Screw the plug.

3.2.9 Replacement of fine fuel filter

Life time of fine fuel filter depends on cleanliness of the fuel used.

Replace filter ФТ020-1117010 when conducting TM-3 according to figure 16, for this

purpose:

- drain fuel from the filter, having unscrewed plug 4 in the lower part of the body;

Do not let the fuel spill, drain the fuel only to a container.

- unscrew filter 1 from fitting 8 in body 2 and replace it with a new filter ФТ020-

1117010 (JSC “Avtoagregat”, Livny, Russia) or Т6101 (EJSC “DIFA”, Grodno, Republic

of Belarus), supplied in assembly with gasket 7, which shall be previously lubricated with

motor oil;

- as the gasket 7 touches mounting surface A on the body 2, turn the filter by ¾

revolutions more. Herewith, turn the filter only by force of hands;

- turn on the fuel tank valve and fill the system with fuel.

1 – filter ФТ020-1117010; 2 – body; 3 –

bracket; 4 - plug (for drain of sediment);

5-outlet union; 6 – plug (for air outlet);

7 – gasket; 8 – fitting.

Figure 16 – Replacement of fine fuel filter.

Fuel inlet

Fuel outlet

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 96 97

No comments

MINSK MOTOR PLANT Minsk Service Manual Page 64